Weldex WDAC-2308X Series Instruction Manual

OPERATION MANUALBuilt-in x 23 ZOOMAUTO FOCUS COLOR CAM ERAWDAC-2308X WDN-2308XREAD AND KEEP THIS OPERATION MANUALWELDEX CORPORATION

5. On Screen Display <Fig5-1. Operating OSD display position>,⑤WB MODEATWAuto Trace White BalanceIndoor Preset (3200°K)Outdoor Preset (5400°K)Ma

5.2 Display SETUP MENU a. Press MENU key above 2 seconds so that SETUP MENU 1 is display ed on the screen. b. Select item of SETUP M

ⅰ) Set AUTO BLC mode >> SETMENU 1 << BACKLIGHT AUTO . . .

④ Mirror Mode : Mode ON is Mirror mode, Mode OFF is general screen state. MIRROR OFF → ON

Set Start Zoom ratio : Set boundary v alue of WIDE zooming. START ZOOM x 1 ~ x 22 ( in optical zoom region ) Set End Zoom ratio :

6. Communication Protocol ( RS-232C,RS-422) ① by te1 : command 1 (which kind of protocol is this to communicate between A and B.) ② by te2

6.3 EEPROM 6.3.1 Read EEPROM data (f ront 2K by te out of 4K by te) C/SIDdumbyte30xF00xC5dum byte5 dum C/Sdumdumbyte30xF00xC5 ① byte3 is E

6.4.7 Read RED data at ATW WB mode C/SIDdum0x850xAA0xC5dum byte5 dum C/Sdumdum0x850xAA0xC5 ① byte5 is the current RED data at ATW WB mode.

6.5.4 Adjust Weighting v alue of Auto Exposure detection windows C/SIDbyte40x6C0xAA0xC5byte4 dum dum C/Sdumdum0x6C0xAA0xC5 ① byte4 is weighting

C/SID0x000x8A0xAA0xC50x00 byte5 dum C/Sdumdum0x8A0xAA0xC5 ① byte5 is the current counter data to control Shutter Speed6.6.4 Read Shutter Speed ( Ref e

Warning:This equipment generates and uses radio frequency energyand if not installed and used properly, I.e., in strict accordancewith the instruction

C/SIDbyte4byte30x1F0xC5byte4dum byte6C/Sdumdumbyte30x1F0xC5 ① byte3 is EEPROM address to write ( 0x00 ~ 0xFF ) ② byte4 is partial data to write on EE

① byte3 = upper nibble is index ( 0~15 ), lower nibble is upper by te of Lens Zoom Position. ② byte4 = lower by te of Lens Zoom

6.9.1 Set Digital Zoom modeC/SIDbyte40x6E0xAA0xC5byte4dum dum C/Sdumdum0x6E0xAA0xC5 ① byte4 = 0x00 ; Digital Zoom mode OFF ② byte4 = 0x01 ; Digita

C/SIDdumbyte30x850xC5dum dum dum C/Sdumdumbyte30x850xC5 6.10.5 Set Auto Backlight Area ① byte3 is Auto Backlight area to set. (Ref er to. 6.10.4

C/SIDbyte40x640xAA0xC5byte4dum dum C/Sdumdum0x640xAA0xC5 6.11.5 Set Operating OSD Display mode ① byte4 = 0x00 ; Whole Operating OSD OFF ② by

C/SIDbyte40x720xAA0xC5byte4dum dum C/Sdumdum0x720xAA0xC5 6.14.3 Set Negativ e mode ① byte4 = 0x00 ; Negativ e mode OFF ② byte4 = 0x01 ; Negat

① byte5 is data contain the current status 2 of the Camera 0 : AE SENS High0 : AF SENS High0 : Auto Backlight OFF1 : Auto Backlight ONBit01 : AF S

Decrease Shutter Speed in all AE mode0x3AIncrease Shutter Speed in all AE mode0x29Increase HUE in Manual WB mode0x13Decrease HUE in Manual WB mode0x1

① byte3 = 0x00 ~ 0x05 ; There are 6 pages. ② In order to mask Priv acy Zone, f irst of all the page must be chosen. 6.18 Masking Priv acy Zone 6.

7. SpecificationsON(Shutter Speed 1/120) / OFFON / OFF On Scree n Display410 gWeight57 x 59.6 x 101.8 (mm)Dim ensions (WxHxD)Max 4.5W( Motor activ e)

CAUTION FOR SAFE OPERATION1. Wate r and M oisture To prevent fire or shock hazard, do not expose this camera to rain or moisture. 2. Servicin

8. DimensionC O N TV I D E OP O W E RS V I D E O- 29 -

MEMOPrinted in KoreaG-110547-002

CONTENTS1. Features -------------------------------------------------------------- 42. Names & Functions -------------------------------------

Idea l Digital Video Camera for Securi tyThe WDAC-2308X is a compact camera that of f ers easy sy stem integration.Coming with the built-in zoom lens

2. Names & FunctionsTELE(UP) BUTTONNEAR(+) BUTTONFAR(-) BUTTONMENU DISPLAY BUTTONWIDE(DOWN) BUTTONPOWER INPUT TERMINAL CAMERA CONTROL CONNECTO

3. Installation 3.1 Check all accessories with enclosed package . -WDAC-2308X SET

4.1 Remote Control using for Hard wired connection ( Connector pin 3,4,5,6 )4. Camera Control Methods 4.2 Remote Control using for RS-232C connection

4.3 Remote Control using for RS-422/485 connection ( Connector pin 9,10,11,12 ) -------- OPTIONConnect to Serial PORT (COM1 or COM2)14P CableSerial C